Chemlease R&B EZ Release Agent

For best results, prepare the mould by removing wax, release agents, sealers and buffing compounds, then do a final clean with Chemlease® Mold Cleaner EZ and seal the mould with Chemlease® 15 Sealer EZ. Apply Chemlease R&B EZ Release Agent by wiping a smooth continuous film onto small sections (up to 0.6 m² at a time), then wipe off as the solvent begins to evaporate, leaving the surface dry and clear; build 4–5 coats, allowing 15 minutes between coats and 30 minutes final cure before production. If spraying, keep the nozzle 25–38 cm from the mould, apply a thin continuous film (avoid runs/drips), wipe excess, apply 3–5 coats with 15 minutes between coats, then cure 30 minutes after the final coat. For ongoing production, use a preventative maintenance touch-up strategy rather than waiting for parts to stick. As the SDS classifies the product as highly flammable and includes health/environmental hazard statements, follow site controls for ventilation, ignition sources and PPE, and consult the SDS before use.