Composite Equipment for Leisure & Recreation Manufacturing
GRP composites are fundamental to a wide range of leisure products — from caravans and motorhomes to swimming pools, playground equipment and garden structures. MVP UK & Ireland supplies the spray and lamination equipment and mould release chemistry used across the UK leisure composite manufacturing sector.
PRODUCTS MANUFACTURED
Caravan and motorhome body panels
Swimming pools and spa shells
Playground equipment and slides
Garden structures and furniture
Camping and outdoor equipment
Fairground rides and attractions
- CARAVANS & MOTORHOMES
- SWIMMING POOLS
- PLAYGROUND EQUIPMENT
- GARDEN STRUCTURES
- FAIRGROUND
Leisure & Recreation Composite Applications
Leisure composite products span a wide range of applications – from high-volume caravan and motorhome production to bespoke playground equipment and one-off garden structures. Equipment requirements range from continuous production spray systems to hand lay-up for complex or decorative forms.
Caravan & Motorhome Production
Chopper and wet-out systems for caravan and motorhome body panel spray-up, and gelcoat systems for exterior colour finish application.
Swimming Pool & Spa Shells
Gelcoat spray systems for pool shell colour coats and chopper/wet-out systems for structural laminate application - large-area, consistent output.
Playground & Outdoor Equipment
Spray lamination and gelcoat equipment for GRP slides, climbing structures, shelters and outdoor playground components.
Garden & Decorative Composites
Hand-held spray guns and gelcoat applicators for garden furniture, planters, water features and decorative GRP products.
On-site
All equipment commissioned and trained at your facility
UK & IE
Full coverage of Great Britain and Ireland
0
Solvent emissions with water-based release agent range
Lifetime
Technical support for the working life of equipment supplied
Need process advice? MVP UK & Ireland has direct composite manufacturing experience alongside our equipment knowledge. We can discuss your specific process, resin system and production requirements before recommending equipment or release chemistry.
Equipment & Materials for Leisure Composites
Chopper & Wet-Out Systems
Patriot, UltraMAX and Pro spray systems for caravan panels, pool shells and leisure product lamination.
Gelcoat Spray Systems
High-quality pigmented gelcoat for caravan exteriors, pool shells and leisure product surfaces.
Putty & Adhesive Systems
Composite putty and adhesive dispensing for leisure product repair, assembly and detail finishing.
Mould Release Agents
Chemlease® and Zyvax® systems for leisure composite tooling – semi-permanent grades for pool, caravan and playground moulds.
Solvent Recovery Units
Solvent recycling for caravan, pool and leisure composite facilities handling regular acetone volumes from lamination and cleaning.
Spray Guns & Applicators
Air trigger and standard spray guns for gelcoat and chopper application on smaller leisure components and decorative products.
“The leisure sector demands excellent surface finish alongside production efficiency. Whether that’s a caravan exterior, a swimming pool shell or a playground slide, the gelcoat and lamination equipment has to perform consistently.”
MVP UK & Ireland – Technical Team
Process Requirements & Considerations
Caravan and pool production requires high-quality gelcoat finish - surface quality is a key consumer expectation
High-volume pool and caravan facilities benefit from semi-permanent release agents to reduce mould downtime
Playground and garden product manufacturers often produce multiple colours - gun cleaning efficiency matters
Solvent management for facilities running multiple spray systems across a shift
Leisure manufacturers increasingly facing VOC and workplace exposure requirements
Leisure Composite Production
Answers to the questions we receive most often from leisure composite manufacturers about equipment, release agents and process support.
What composite equipment is used in caravan and motorhome manufacturing?
Caravan and motorhome production uses chopper and wet-out systems for body panel lamination and gelcoat spray systems for exterior colour coat application. MVP UK & Ireland supplies Patriot, UltraMAX and Pro chopper systems along with Patriot and Pro gelcoat systems, all widely used in UK caravan and motorhome manufacturing.
What gelcoat equipment is used for swimming pool shell production?
Swimming pool shell production uses gelcoat spray systems for the colour coat and chopper/wet-out systems for structural laminate lay-up. Both require consistent spray output over large surface areas. MVP UK & Ireland supplies gelcoat and chopper equipment suitable for pool shell production, along with mould release systems for pool tooling.
Which mould release agents are suitable for playground equipment composite tooling?
Chemlease® and Zyvax® release agents are both used for playground equipment composite tooling. Semi-permanent grades are relevant for high-cycle playground component moulds. Water-based Zyvax® products are suitable for facilities reducing solvent use. MVP UK & Ireland can advise on selection based on tooling material and resin system.
Does MVP UK support smaller leisure composite manufacturers?
Yes. MVP UK & Ireland provides technical support, product selection advice and on-site commissioning for manufacturers of all sizes across the leisure composite sector – from large caravan and pool shell manufacturers to small producers of garden and decorative GRP products.
Discuss Your Leisure Requirements
Contact MVP UK & Ireland for equipment recommendations, release agent selection and technical support for your leisure composite operation.