Chemlease 41-90 EZ Release Agent is used in composite closed-mould processes where high slip is needed to de-mould abrasive or low-draft parts, helping achieve multiple releases with minimal transfer. For application, the TDS recommends cleaning the mould (remove waxes/release/sealers), then applying a suitable sealer for new or porous moulds. Apply by wipe or spray as a smooth, wet (not runny) continuous film, wipe off excess before it dries, allow 15 minutes cure, repeat for 3–5 coats, then allow 30 minutes final cure before moulding; reapply a light touch-up coat as required. Because the SDS classifies the product as highly flammable and includes health/environmental hazard statements, always follow site safety procedures and consult the SDS before use.
|
FEATURE
|
DESCRIPTION
|
|---|---|
|
High-Slip Release for Low-Draft & Abrasive Parts
|
Formulated as the high-slip version of the Chemlease 41 family, designed for closed moulding of abrasive or low-draft parts (often on “B” sides).
|
|
Multiple Releases with Minimal Transfer
|
Delivers multiple releases between applications while maintaining minimal transfer to the moulded part for cleaner production cycles.
|
|
Rapid-Curing, Production-Friendly Application
|
A rapid-curing semi-permanent system applied as a smooth film (wipe or spray), supporting efficient shop-floor routines.
|
|
High Thermal Stability
|
Provides high thermal stability, supporting demanding composite moulding conditions.
|
|
Reduced Labour Time & Cost
|
Designed to help reduce labour time and cost through repeatable release performance and simplified maintenance.
|
|
HAPs-Free* & No Class I/II Ozone-Depleting Substances
|
HAPs are not formula constituents, and the solvent carriers contain no Class I/II ozone‑depleting substances.
|
*HAPs are not formula constituents of this product. Standard manufacturing processes may result in trace quantities [<0 .1%] of HAPs. Please view TDS for more information.
This product is available in a variety of packaging sizes. Please contact our customer support team for details.
