- Plated steel roller support for strength and durability.
- Recessed head nut will not hang up and is easy to remove.
- Wooden handles are durable and are easy to clean.
- All handles accept extensions.
This attachment can be used to dispense catalysed resin directly into a mould without spraying or hand mixing. Normally, the Resin Roller Dispenser is used with an MVP Internal Mix Saturating Unit. Flushing of the tool is accomplished with the standard flush system for the gun.
Resin is pumped through a perforated T-bar onto the roller which then spreads the resin evenly onto the work surface. Where the roller is not required it can be removed allowing resin to flow directly from the T-bar. Roller covers are low cost and easily replaceable.
The resin is never atomized when using the Resin Roller; thus, fumes are kept to a minimum.
Output Capabilities: Up to 20 lbs ( 9 kg ) per minute
72317-1: Resin Roller Assembly – 9″ x 18″
72317-3: Resin Roller Assembly – 9″ x 36″
72317-5: Resin Roller Assembly – 9 x 72″
IMW-UPS-11: UltraMAX™ Saturator Unit
5111-01-01-INT: SuperPro Gun