 |
|
| |
The all stainless steel Catalyst Alarm system flow sensor design provides an exceptionally sensitive flow indication of the important catalyst volume being mixed with the resin.
The CTL Series of Catalyst Alarms provide the user with an audible alarm when the flow of catalyst gets too low during operation.
Email or call us for further details.
(Back to product home page) |
Designed to be used with spray, injection and recirculation applications, these stainless steel alarms allow the operator to set the sensitivity of catalyst flow, and is activated by the start of the pumping process. At the beginning of the next operation, the operator is able to reset the alarm with the simple push of the "restart" button.
These alarms are set at the factory for "typical" flow rates, but can be adjusted to accommodate a "low flow" or "high flow" rate. Once the operator determines the ideal flow rate for their production, the alarm is very simple to set to the lowest acceptable flow rate.
If the flow drops below that, the alarm will sound. Both of these rugged alarms are built to stand up to many operating hours, and to last for "the long run". |
|
|
|
|
 |
|
Registered in England No. 2158412
Reg. Office: Unit 22a, Navigation , Hurst Business Park, Brierley Hill, West Midlands, DY5 1UT, UK
Telephone: + 44 (0) 1384 486222
Fax: +44 (0) 1384 486224 • info@mvpeurope.co.uk |
 |
|
©2010 MAGNUM VENUS PRODUCTS EUROPE • ALL RIGHTS RESERVED – TERMS & CONDITIONS • PRIVACY POLICY • COPYRIGHT • DISCLAIMER
Website Design by Five Fingers Design Limited – Commercial Photography by Cannedphoto |
| |
